Sealant BCG F 1l

BCG® F liquid sealant eliminates water loss up to 20 litres per 24 hours in heating systems, pipelines, radiators and under-floor heating systems filled with antifreeze liquid or brine. Can also be used in earth collectors and solar systems. BCG F forms an elastic seal at the leakage. BCG® F seals all commonly used pipe materials (plastics, metals, press fittings, floor-heating systems). Can also be used in earth collectors and solar systems. BCG F forms an elastic seal at the leakage point. Eliminates water loss up to 20 litres per 24 hours. Can be used in systems filled with frost protection. BCG F seals ermanently and is resistant to ageing. BCG F can be used with solar collectors and earth collectors. 1 litre BCG F to 100 litres of heating water. An inadequate dose reduces the effectiveness. The heating system must be filled with water and purged. Open all mixer and heater valves fully. Purge circulation pumps and leave running. Reduce the system water by the required quantity BCG F. Shake the BCG F canister well. The required quantity BCG F (see table) is introduced diluted using the boiler fill and drain valve. Empty and rinse the canister so that the residual product is used. Purge the circulation pumps again well via the control screw. The heating system must remain operational for 7 hours with full circulation and heating on. The actual sealing takes on 1 or several days depending on the nature of the leakage. BCG F must remain in the system!